Skip to content

About.

Cars With Claver Advanced Engineering

Diagnose.
Rebuild.
Prove it.

Whole-system scanning Precision machining Controlled load testing
01 / 04 Advanced diagnostics
Advanced diagnostics

Find the fault.
Not a scapegoat.

Whole-vehicle scans, live data, signals and physical evidence.

Engine Transmission ABS / SRS CAN Network Actuator Tests
Advanced vehicle diagnostic testing
Live vehicle analysis
Professional full-system diagnostic scanner
Full-system scanner
Technician using a tablet diagnostic system
Guided live testing
LIVE Sensor data
CAN Network check
ACT Actuator test
ROOT Cause isolated
Precision machining

Measure before
rebuilding.

Bores, journals, clearances and sealing surfaces.

Block Inspection Cylinder Bores Crank Journals Surface Finish
Professional engine rebuilding and machining facility
Machine-shop precision
Engine block being machined
Block machining
Industrial engine-parts cleaning machine
Component cleaning
BORE Wear measured
DECK Surface checked
CRANK Journal measured
CLEAN Parts prepared
Engine rebuilds and overhauls

Clean. Machine.
Assemble.

A controlled rebuild—not a box of parts and crossed fingers.

Matched Components Torque Sequence Bearing Clearances Oil Priming
Professionally rebuilt engine
Completed rebuild
Comprehensive engine rebuild kit
Matched rebuild parts
Cutaway view of an internal combustion engine
Internal geometry
FIT Parts matched
TORQUE Sequence set
PRIME Oil system ready
BUILD Assembly verified
Rolling-road validation

Prove it
under load.

Heat, fueling, boost, shifts and power delivery—observed live.

Road-Load Simulation Fueling Thermal Response Post-Repair Proof
CONTROLLED ROAD-LOAD VALIDATION
LOAD Demand applied
RPM Speed tracked
HEAT Thermal check
PASS Repair proven
Whole-system scanning Live data CAN analysis Engine machining Parts cleaning Precision assembly Rolling-road testing Final validation
The CWC engineering path

Evidence to handover.

Workflow active
01
Scan Codes • data • signals
02
Measure Wear • pressure • clearance
03
Build Machine • clean • assemble
04
Validate Heat • load • road test
SYS-01 Engine Management
SYS-02 Transmission
SYS-03 ABS / Stability
SYS-04 Airbag / SRS
SYS-05 Steering
SYS-06 AWD / 4WD
SYS-07 Battery Management
SYS-08 Air Conditioning
SYS-09 Body Electronics
SYS-10 CAN Communication

Stop changing parts blindly.

Book advanced diagnostics, an engine overhaul assessment or controlled post-repair testing.

Book technical assessment